Seco-Larm SK-910R4Q 4-Channel Receiver 315MHz

Seco-Larm SK-910R4Q 4-Channel RF Receiver 315MHz, 500ft Range

Seco-Larm SK-910R4Q controls home automation functions, garage doors, alarm panels, etc., from up to 500ft. Four independently programmable outputs, compatible with all 315MHz ENFORCER transmitters. Mode switch for easy programming. 4 LEDs, one per channel, indicate RF reception, learn mode, transmitter cleared, output type.

Seco-Larm SK-910R4Q Features

• Patented CODEBUMP^TM anti-code grabbing technology (requires use of CODEBUMP transmitter)
• Uses either fixed code or code hopping transmitters with up to 500ft (150m) range* using standard antenna
• External extended range antenna optional
• Mode switch for easy transmitter learning
• Easily Code-learns up to 15 remotes per channel
• Stores codes safely in EEPROM for up to one year in case of power loss
• All outputs are independently controlled. (i.e. Channel 1 can be toggle, Channel 2 can be one second momentary, etc.)
• Four Form-C Dry Relay Contact (NO/NC/COM) Outputs. Each output rated 10 Amps at 24 VDC
• 4 Separate Channels / 4 Output Modes Each:

1. Timed Momentary (1, 2, 3, 4, 5, 10, 30, 60 sec.)
2. Toggle (On/Off)
3. Latch (Output stays on until manually reset)
4. Continuous or Validity (Output for as long as signal is received)

Note: If the timed momentary output is chosen for any channel, there will be only one time available for all channels. In other words, if a one-second output time is selected for one channel, then all other timed momentary outputs will be one second.

Four LEDs (One LED for each channel) to indicate RF reception, learn mode entered, transmitted learned, memory cleared

• Use to control the garage door, house lights, alarm control panel, or other functions that require momentary or shunt operation
• In addition, these revolutionary receivers have:

1. Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals
2. HIGHER SENSITIVITY for greater operating distances
3. UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted
4. GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration

*Actual range will vary greatly depending on the installation and operating environment.

Seco-Larm SK-910R4Q Specifications

• Operating voltage: 11~24V AC/DC
• Range: Up to 500' (150m) with SECO-LARM transmitter
• Dimensions: 5-5/16" x 3-15/16" x 1-1/8" (135 x 100 x 27.5 mm)
  
• Relay Rating: 5-5/16" x 3-15/16" x 1-1/8" (135 x 100 x 27.5 mm)
  
• Current Draw: ~12mA@12VDC (standby), 50mA@12VDC per channel, activated
  
• Number of Stored Transmitter Codes: 15 per channel, 60 per receiver
  
• Compatible Transmitters: Fixed-Code Models (SK-919 Series) CODEBUMP Models (SK-917T Series)
  
• Relay Output Modes: Programmable independent outputs: timed momentary (1, 2, 3, 4, 5, 10, 30, 60 sec.), toggle (ON/OFF), latched, continuous
  
• Connectors: Screw terminals: Power (+,-), 1 relay per channel (NO/NC/COM)
  
• RF Codes: 18 quintillion, for ENFORCER CODEBUMP remotes. 68 billion, for ENFORCER fixed-code remotes

Seco-Larm SK-910R4Q Includes

• 1 x SK-910R4Q Receiver